Calls Are Missing from Call Logs
Can't find a call in Call Logs? Check the Pod, your filters, where the call was started, webhook sync and processing time, in that order.
Written By voiceaiwrapper
Last updated 26 days ago
A call happened, but you can't find it in Call Logs. Usually the call is there and a filter or the wrong page is hiding it. Sometimes VoiceAIWrapper never heard about the call, because it was started outside VoiceAIWrapper or the agent isn't synced. This article goes through the checks from the most likely cause to the least, so you can find the call or stop it happening again.
Before you start
Have these to hand:
- When the call happened, roughly.
- The phone number of the caller or the lead.
- Which Pod (an engine or provider connection) the agent belongs to, and which engine it runs on: VAW Native, Vapi, Retell AI or ElevenLabs.
Where each call shows up
There are two places to look, and they don't show the same calls:
Calls that aren't part of a campaign, such as test calls from an agent page, only appear on the Pod's Call Logs page.
Which calls VoiceAIWrapper records depends on the engine:
Work through the checks
1. You're on the wrong Pod or the wrong page.
1. You're on the wrong Pod or the wrong page.
Call Logs only shows the Pod you're in. If you have several Pods, open the Pod selector in the header and switch to the Pod the agent belongs to.
If you're on a campaign's Calls tab, the call may belong to another campaign, or to no campaign at all. Open Call Logs in the sidebar instead and search there.
2. A filter or search is hiding the call.
2. A filter or search is hiding the call.
Look at the filter bar above the list. Remove every filter chip and clear the search box, then look again.
- You opened Call Logs from a lead on the All Leads page. The list is then filtered to that lead's calls with a Lead IDs filter. Remove it to see every call.
- VAW Native: missed calls are hidden by default. A call that couldn't start because every line was busy ends with Concurrency limit reached. The line under the filter bar says "missed calls are hidden". Add the Missed calls filter and choose Include missed calls.
- VAW Native: analysis filters. "Calls whose analysis report is still being written, was skipped, or failed never match a Call success or User sentiment filter." Remove those filters to see recent calls.
- Search. On VAW Native, the box searches by name, number or agent. On Vapi, Retell AI and ElevenLabs, it searches by lead name, phone or call ID. Try searching for the last few digits of the number.
3. The call was started outside VoiceAIWrapper (Retell AI and ElevenLabs).
3. The call was started outside VoiceAIWrapper (Retell AI and ElevenLabs).
Retell AI and ElevenLabs only send a call to VoiceAIWrapper when it can be matched to your Pod or a campaign. Calls you start in the provider's own dashboard, through the provider's API, or on a number that isn't used by an inbound campaign aren't recorded. Check the table in Where each call shows up.
To have these calls appear:
- Inbound calls: add the number to an inbound campaign. On Retell AI, also sync the number on Phone Numbers. See Run an Inbound Phone Campaign.
- Outbound calls: place them through an outbound campaign instead of your provider's dashboard. See Run an Outbound Phone Campaign.
- Tests: use the test call in VoiceAIWrapper rather than the one in your provider's dashboard.
Calls VoiceAIWrapper never received can't be added afterwards. You'll still find them in your provider's own call history.
4. The agent or number isn't synced (Vapi, Retell AI and ElevenLabs).
4. The agent or number isn't synced (Vapi, Retell AI and ElevenLabs).
VoiceAIWrapper learns about a call when your provider sends it an event. If the agent's webhook points somewhere else, nothing arrives.
- Open Assistants (Vapi) or Agents (Retell AI, ElevenLabs).
- In the Webhook URL column, look for Sync required. Hover it to see where the agent sends events now, shown as Current:.
- Click Sync now.
- On Vapi and Retell AI, do the same for the number on Phone Numbers.
Refresh the page first: the column shows the state from when the page loaded, and someone may have changed the agent in your provider's dashboard since. Only calls made after you sync are recorded. See Sync Webhooks So VoiceAIWrapper Can Track Calls.
5. The ElevenLabs webhook is set up wrong.
5. The ElevenLabs webhook is set up wrong.
ElevenLabs sends every call result to one webhook in your ElevenLabs workspace. Syncing an agent attaches that webhook to it. If the webhook is missing, points elsewhere, or the Pod has the wrong webhook ID, no ElevenLabs call reaches VoiceAIWrapper.
- In ElevenLabs, open Developers β Webhooks. Check that the endpoint still exists and that its URL is exactly the Webhook Callback URL shown in the Pod's settings.
- In VoiceAIWrapper, edit the Pod from the Pod selector. Check that ElevenLabs Webhook ID matches the endpoint's ID in ElevenLabs. A mistyped ID isn't caught when you save. If the endpoint exists but points to another address, saving shows "ElevenLabs Webhook URL is not correct".
- Open Agents and click Sync now on any agent marked Sync required.
See Connect ElevenLabs Agents and Manage Pods: Rename, Update Keys, Switch and Delete.
6. The call is still being processed.
6. The call is still being processed.
A call appears at different times depending on the engine:
- VAW Native: the call appears as soon as it starts and updates while it runs. The analysis report is added shortly after the call ends.
- Vapi and Retell AI: the call can appear while it's still running. The transcript, recording and duration are added when your provider reports that the call ended.
- ElevenLabs: ElevenLabs sends the call's details only after it has finished the transcript, once the call has ended. Outbound campaign calls are listed as soon as they're dialled and filled in then. Inbound and test calls only appear at that point.
Wait a few minutes, then reload the page.
7. The call is listed but looks stuck "in progress" (Vapi, Retell AI and ElevenLabs).
7. The call is listed but looks stuck "in progress" (Vapi, Retell AI and ElevenLabs).
If your provider never reported the end of the call, it stays on a status other than Ended, with no transcript. Click the refresh icon next to its status (Sync Status). VoiceAIWrapper then fetches the call's latest status and details from your provider.
On a campaign's Overview tab, calls that have been running for 20 minutes or more appear under Calls running unusually long, each with a Sync status button. "Our system will auto clear these calls in some time; if you want, you can sync the call status manually." See Campaign Overview: Lead Health, Live Calls and Next in Line.
If this happens often, check that the agent is synced (check 4). On Vapi, also check the assistant's server messages, as described in Sync Webhooks So VoiceAIWrapper Can Track Calls.
8. VAW Native: the call never reached VoiceAIWrapper.
8. VAW Native: the call never reached VoiceAIWrapper.
On VAW Native, every call that reaches your number gets a row, even one that was refused. If there's no row at all, the call stopped before it reached VoiceAIWrapper, usually in your Twilio account. Work through My Phone Number Doesn't Ring, starting with the check on your Twilio account.
9. You can see the call, but your client can't.
9. You can see the call, but your client can't.
Clients only see calls that belong to their workspace:
- Vapi, Retell AI and ElevenLabs: calls from campaigns assigned to the workspace. Calls with no campaign, such as your own test calls, never appear in the portal. See Assign a Campaign to a Client.
- VAW Native: calls handled by agents assigned to the workspace. See Create a Workspace and Assign Assets.
The client also needs permission to view call logs in that workspace. See Set Client Permissions on VAW Native Workspaces or Set Client Permissions on Vapi, Retell and ElevenLabs Workspaces.
Still missing?
Open Need help? β Help Chat and include:
- The Pod name and engine.
- The time of the call and the phone number.
- Your provider's call ID, if you can find the call in your provider's dashboard.
- Your Tenant ID from Settings β General ("Reference this when contacting support.").
Related articles
Was this helpful?
More in Troubleshooting and FAQs
My Agent Doesn't Speak or Goes SilentMy Phone Number Doesn't RingCSV Import Errors and Invalid LeadsMy Webhook Isn't Receiving DataStill need help? Share an idea