Skip to main content
Troubleshooting and FAQs

My Client Can't Log In or Sees 'Access Paused'

Work out why a client can't sign in to their portal, or sees a blocking screen after signing in, and which setting fixes it.

Written By voiceaiwrapper

Last updated 26 days ago

When a client tells you they can't get into their portal, the cause is almost always one of a handful of settings on your side: their login, their client account's status, their billing, your portal domain or their workspace permissions. This article helps you find which one in a few minutes.

Start by asking the client for the exact message they see, then match it below.

Before you start

The fastest check is to open the portal as the client yourself:

  1. In the sidebar, open Client Accounts and click the client.
  2. Open the Users tab and click Login as User on their row.
  • The portal opens and works: the problem is with how the client signs in (their email, password or network). Go to If the client can't sign in below.
  • You see a blocking screen or an empty portal: you're seeing what the client sees. Go to If the client sees a screen instead of their dashboard below.

Login as User is only available once the user has set a password. See Log In as a Client to Preview Their Portal.

If the client can't sign in

These are ordered from most to least likely.

The user hasn't set a password yet, so there's nothing to sign in with. On the Users tab, their Status shows Invited and Set up password shows Awaiting user.

  • Ask them to open the set-password email and click the link. It works for 72 hours.
  • If the link expired or they can't find the email, open the user's menu (three dots) and click Resend set-password email. This sends a new link and stops the old one working.
  • Or set a password for them with Update Password and share it yourself.

See Add and Manage Client Users.

Set-password emails are sent through your own SendGrid account. Check:

  1. SendGrid is connected and email is on. Open Client Portal β†’ Client Emails β†’ Email Configuration. The sender email must be verified in SendGrid.
  2. The template is on. On Email Templates, the Client User Password Setup template must be active.
  3. The email was sent. On Email Delivery Logs, search for the client's email address.
  4. Spam. Ask the client to check their spam or junk folder.

If Send set-password email was greyed out when you added the user, the email was never sent. Hover over the box to see why, fix it, then use Resend set-password email, or set a password with Update Password.

See Send Branded Emails to Clients with SendGrid.

The email or password is wrong. Check the client is using the exact email address shown on the Users tab. Then set a new password with Update Password and share it with them.

The portal's Forgot password? link only appears when SendGrid is connected and the Client User Password Reset template is on. If the client doesn't see it, use Update Password instead.

The client account is disabled. On Client Accounts, its Status shows Disabled. Open the client's Actions menu and click Enable access. Users can sign in again straight away with their existing passwords.

Clients are also disabled automatically when your own VoiceAIWrapper subscription is paused. After you resume, enable each client again.

If enabling fails with "You've reached your client account limit. Buy more seats in Billing to re-enable this client.", you have more clients than your plan allows. Add client accounts in billing, or disable a client you no longer serve. See Enable, Disable or Delete a Client.

The client's Security tab has IP rules, and the address they're signing in from is blocked or not on the allow-list. Typical causes are working from home, a mobile hotspot, a VPN, or an office internet connection whose address changed.

Open Client Accounts β†’ the client β†’ Security. Add the client's current address to the IP whitelist, remove it from the IP blacklist, or turn the list off. The Security tab only appears on plans that include Client IP access control. See Restrict Client Access by IP Address.

The client may be using a portal address that isn't working yet. As soon as you add a custom domain under Client Portal β†’ Portal Configuration β†’ Domain Settings, Copy portal link gives the new address, even while it's still being set up.

Check that Domain Settings shows Live. Until it does, the address doesn't work for anyone. Fix the DNS record, then send clients the link again. See My Custom Domain Won't Verify.

If the client sees a screen instead of their dashboard

After signing in, a full-page screen can replace the portal. Each one has a clear cause.

Billing screens

Screen titleBilling methodCauseFix
Payment Pending - Action RequiredStripeYou assigned a plan with no trial and the client hasn't paid.The client clicks Proceed to checkout.
Ready to get started?StripeYou assigned a plan with a trial.The client clicks Start Trial (No Card Needed) or Start Trial (Card Needed).
Trial Minutes Limit Exhausted - Action RequiredStripeThe trial's minutes ran out before its days did.The client clicks Activate Subscription.
Trial Ended - Action RequiredStripeThe trial is over.The client clicks Add Payment Method or Proceed to checkout.
Subscribe to continue (or your plan's name)ExternalYou assigned a plan but no subscription has started.The client clicks Subscribe.
Payment overdueExternalA payment request is past its due date.When you receive the money, open the client's Billing β†’ Payment Requests, click Update status and choose Paid.
Subscription suspendedExternalThe grace period after the due date ended.On the client's Billing β†’ Current Plan, click Cancel subscription, then start a new one.
Account disabledExternalYou disabled the client.Click Enable access.
Access pausedExternalAccess is blocked for a reason the portal doesn't name.Check the client's status and billing below.

Cancelling an External billing subscription deletes its usage tracking, so the client's included minutes start again from the new subscription. This can't be undone. See Overdue Payments and Grace Periods (External Billing) before you cancel.

After paying or after you fix things, the client clicks the refresh button on the screen (for example Already paid? Refresh or Refresh after paying).

If a client sees Access paused:

  1. Check the client's Status on Client Accounts: Disabled needs Enable access; Billing paused means a payment failed, the client's minutes ran out, or an External billing payment is overdue.
  2. Open the client's Billing tab and check the subscription and any unpaid payment requests.
  3. Use Login as User again after each change to confirm the screen is gone.

If it's still there, contact support with the client's name and a screenshot.

For what each billing screen means in detail, see What Clients See When Payment Is Due. Due dates and grace periods for External billing are explained in Overdue Payments and Grace Periods (External Billing).

"Your account doesn't seem to have the right configurations."

The client signed in, but their workspace doesn't let them see anything: every area is set to No Access, or the workspace has nothing assigned. The page says "Your account doesn't seem to have the right configurations. Please reach out to our support team."

Open Client Accounts β†’ the client β†’ Workspaces, edit the workspace, and on Access Control give at least one area (for example Dashboard or Campaigns) a level other than No Access. Check that Asset Assignment includes the agents or campaigns they should see. Then save the workspace.

If the client has no workspace at all, add one. See Create a Workspace and Assign Assets.

"You do not have access to this section."

The client opened a page their workspace doesn't allow. Give that area a level other than No Access in the workspace's Access Control, or leave it hidden if that's intended.

Still stuck? Open Need help? β†’ Help Chat and include the client's name, the user's email and the exact message they see.